安琦
E-mail: anqi@ecust.edu.cn
職位: 博士生導師
職稱: 教授
個人簡介:
1963年生，博士，教授，博士生導師，機械工程一級學科博士點負責人，機械機械設計制造及其自動化專業責任教授，政協上海市十一屆和十二屆委員、十三屆常委。民盟華東理工大學委員會副主委、民盟上海市委常委，教育部機械基礎教學指導委員會委員，華東理工大學學報等4家國內期刊的編委，10余家國外期刊的長期審稿人，中國工程機械學會理事，1996年1月畢業于浙江大學機械學專業，獲得工學博士學位。曾于1999年前往英國LEEDS大學摩擦學實驗室進行為期一年的訪問研究。2001年晉升為教授，2003年被評為博士生導師。
聯系方法:
Tel: 021-64251834
E-mail:anqi@ecust.edu.cn
研究方向
工程摩擦學、轉子動力學、流體潤滑、密封理論及其應用、現代設計方法研究、現代新產品開發研究。
承擔科研項目
主持或參與國家級及企業各類項目30余項。
獲獎成果
在國內外重要期刊及會議上發 表論文300余篇，獲得國內專利40余項, 出版教材3部(主編)。承擔本科生核心課程《機械設計》、《機械設計課程設計》、研究生課程《工程摩擦學》、博士生課程《現代流體潤滑理論》等課程的教學 工作。3次獲得上海市教學成果2等獎，3次獲得華東理工大學教學成果1等獎，2次獲得上海市科技成果3等獎，2003年獲得寶鋼優秀教師獎，2004年被評為華東理工大學最具 人格魅力的好老師稱號，2007年被評為上海市高校教學名師, 2013 年被全校研究生投票評選為華東理工大學“良師益友”稱號，2016年獲得上海市教書育人楷模提名獎，2016年獲得國務院特殊津貼。
代表性著作
[1] Li Zhengmei, Zhou Qiong, An Qi, Tang Jianping. Influences of Eccentric Unbalances on Loads and Life of Auto Water Pump Bearing. Mechanism and Machine Theory, 2011, 46(3): 253-263. (SCI).
[2] Li Zhengmei, Zhou Qiong, Tang Jianping, An Qi. Load Calculation and Life Prediction for Auto Water Pump Bearing. ASME Journal of Tribology. (SCI, Accepted).
[3] Li Zhengmei, Zhou Qiong, Tang Jianping, An Qi, Sang Shengju, Wang Jianwen. A Precise Calculation Method for Heat Generation Rate of Auto Water Pump Bearing. STLE Tribology Transactions. (SCI, Accepted).
[4] Li Zhengmei, Zhou Qiong, Tang Jianping An Qi. Flexural Vibration Analysis of Auto Water Pump Bearing-Rotor System with a Modified Transfer Matrix Method. Proc. IMechE Part K: Multi-body Dynamics. (SCI, Accepted).
[5] Zhou Qiong, Li Zhengmei, Sang Shengju, Tang Jianping, An Qi. A numerical simulation method for hydrodynamic lubrication of lip seal. Proc. IMechE Part J: Engineering Tribology, 2011, 226: 99-110 (SCI)
[6] Zhou Qiong, Li Zhengmei, Tang Jianping, Xu Zemin, An Qi. Finite Element Analysis on the Contact Stress of Automotive Water Pump Bearing’s Seal. Structural Integrity and Materials Ageing in Extreme Conditions, Proceeding of 2010 International Symposium on Structural Integrity, Shanghai, China, 2010. (ISTP)
[7] Zhou Qiong, Li Zhengmei, Tang Jianping, An Qi.Thermoelastohydrodynamic analysis of auto water pump bearing seal. Proc. IMechE Part J: Engineering Tribology. (SCI,Accepted)
[8] WU Hao, WANG Jian-wen, AN Qi．Calculating method of radial stiffness of cylindrical roller bearings．Symposium of Evaluation,Inspection and Monitoring of Structural Integrity,2008.10:481-485
[9] WU Hao, WANG Jian-wen, AN Qi．Vibration Characteristics of Jeffcott Rotor System on Cylindrical Roller Bearings．Frontiers of Mechanical Engineering in China,2009.01，305-309
[10] Wu Hao, Sang Sheng-Ju, An Qi. A New Vibration Model for Bearing-Rotor System with Considering Bearing Structure.Proceedings of Institution of Mechanical Engineers-Part K-Journal of Multibody Dynamics. 2011，255:1-11. (SCI)
[11] Wu Hao, Zhou Qiong, Zhang Zhiming, An Qi. Research on Bearing-rotor System of Air-blower. Journal of Mechanical Science and Technology. Journal of Mechanical Science and Technology 26 (3) (2012) 1~7(SCI)
[12] Chen Shoujun，An Qi，Zhang Yi，Gao Lianxin，Li Qiang．Loading analysis on the thread teeth in cylindrical pipe thread connection．Journal of Pressure Vessel Technology，ASME，2010，132(3)：031202．(SCI)
[13] Chen Shoujun，Li Qiang，Zhang Yi，An Qi．Finite element analysis of tooth load distribution on P-110S conic threaded connection．International Journal of Pressure Vessels and Piping，2011，88(2-3)：88-93．(SCI)
[14] Chen Shoujun，An Qi，Zhang Yi，Li Qiang．Research on the calculation method of tightening torque on threaded connection．Journal of Pressure Vessel Technology，ASME，2011，133(5)：051207．(SCI)
[15] Chen Shoujun，Li Qiang，An Qi．Calculation method of radial stress and deformation on conic threaded connections with interference fit．Frontiers of Mechanical Engineering in China，2010，5(3)：302-307
[16] Chen Shoujun，Gao Lianxin，An Qi．Calculation method of load distribution on pipe threaded connections under tension load．Frontiers of Mechanical Engineering in China，2011，6(2)：241-248
[17] Yan Qin-hua, Huang De-quan, An Qi. Numerical Research of the Influences of the Outer Raceway Curvature Radii on the EHL Properties of Ball Bearing. Journal of Donghua University, 2006, 23(2): 83-87
[18] An Qi，C M Taylor, M Priest． Study on the influences of bubbly oil on the cavitation erosion in journal bearings of engines．Chinese Journal of Mechanical Engineering. Vol.14, No.4,2001,378~380,384．
[19] Wang Jianwen, An Qi. A proposed measurement method for void fraction in lubricant oil based on the image processing technique. Review of Scientific Instruments. 2008,79:1-4. (SCI)
[20] An Qi,C M Taylor, M Priest．Experimental study of the influence of bubbly oil on the cavitation erosion of engine journal bearing materials. Leeds-Lyon Tribology’2000，Lyon, France.
[21] Zhang Z.M., An Q., Zhang W.J., Tang Y.J., Yang Q., Chen X.B. Modeling of directional friction on a fully lubricated surface with regular anisotropic asperities. Meccanica. 2011, 46(3): 535-545. （SCI）
[22] Zhang Z.M., An Q., Li J.W., Zhang W.J.. Piezoelectric Friction-Inertia Actuator - A Critical Review and Future Perspective. Int. Journal of Advanced Manufacturing Technology. 2012, (SCI)
[23] Zhang Z.M., An Q., Zhang W.J. Modeling of Directional Friction for Anisotropic Asperity Surface Based on LuGre Model. Imech – Part J Journal of Mechanical Engineering Science. 2012, Accepted. (SCI)
[24] Zhang Z.M., An Q., Zhang W.J., Tang Y.J., Yang Q., Chen, X.B. Study of directional friction on the fully lubricated surface with regular anisotropic asperities. 2nd European conference on Tribology. Pisa, Italy, 08-10 Jun., 2009.
[25] Zhang Z.M., An Q., Zhang W.J.. Directional Friction: Concept and its Realization using the Hydro-Dynamic Lubrication Technology. 2009 STLE Annual Meeting and Exhibition. May 17-21 2009. Lake Buena Vista, Florida, USA. 578-580 (EI)
[26] Yuan Gao, Zhengmei Li,Jianwen Wang, Xinglin Li, Qi An. Influences of bearing housing deflection on vibration performance of cylinder roller bearing–rotor system. Proceedings of the Institution of Mechanical Engineers,Part K: Journal of Multi-body Dynamics, 2013, 227(2), 106-114
[27] Zongjie Tao, Qi An. Interference analysis and workspace optimization of 3-RRR spherical parallel mechanism. Mechanism and Machine Theory,2013,69,62-72
[28] An Qi,Wang Xiaofang. New teaching model for improving creative design ability for undergraduate students.Proceedings of Symposium on Multi-/Inter-Displinary Engineering Education,2006,ECUST,Shanghai
[29]Q.An, X.Wang. A Post-course Teaching Model for Improving Students’ Creative Mechanical Design Abilities. Proceeding of 10th UICEE Annual Conference on Engineering Education, Bankok,Thailand,2007. P295-297.
[30] Zhou Qiong, AnQi. Detection for Transverse Corner Cracks of Steel Plates Surface Using Wavelet [J]. Frontier of Mechanical Engineering in China，2008，(9-11)
[31] Zhou Qiong, AnQi. Edge Detection of Steel Plates under High Temperature Using Image Measurement [J]. Frontier of Mechanical Engineering in China，2008，(11-12)
[32]Li Hong, An Qi, etl. Construction of small-sized blood vessels in a bioreactor using human bone marrow stromal stem cells. Journal of Clinical Rehabilitative Tissue Engineering Research, March 12,2009,Vol.13,No.11, 2178-2182
[33] Zhen, N; An, Q*. Analysis of stress and fatigue life of ball screw with considering the dimension errors of balls. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES，2018，V137，
68-76
[34]Yang, JP; Zeng, H; Zhu, TQ; An, Q*. Study on the dynamic performance of concrete mixer's mixing drum . MECHANICAL SCIENCES，2017，V8(1)，165-178
[35]Yang, JP; Zeng, H; Zhu, TQ; An, Q *.Study on the dynamic performance of tilt rotor supported by spherical roller bearings. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2017，V231(1)，156-166
[36]Ma, FB; Li, ZM; Wu, BJ; An, Q *.An accurate calculation method for heat generation rate in grease-lubricated spherical roller bearings. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY，2016，V230(4)，472-480
[37]Li, LX; Jiang, YY; Li, ZM; Zhan, YB; An, Q*. Study on the vibration characteristics of a roller-supporting horizontal centrifugal casting machine. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2016，V230(1)，99-109
[38]Huang, LW; Li, ZM; Li, LX; An, Q*. Methods to calculate accurate wheel/rail contact positions and static contact stress levels. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT，2016，V230(1)，138-150
[39]Ma, FB; Li, ZM; Qiu, SC; Wu, BJ; An, Q*. Transient thermal analysis of grease-lubricated spherical roller bearings. TRIBOLOGY INTERNATIONAL，2016，V93()，115-123
[40]Ma, FB; Ji, P; Li, ZM; Wu, BJ; An, Q*. Influences of off-sized rollers on mechanical performance of spherical roller bearings .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2015，V229(4)，344-356
[41]Ma, FB; Jiang, FY; An, Q*. Simulation of hydrodynamic lubrication between cage pockets and rollers in cylindrical roller bearings. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE，2015，V229(14)，2551-2560
[42]Ji, P; Gao, Y; Ma, FB; An, Q*. Influences of roller diameter error on contact stress for cylindrical roller bearing. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY，2015，V229(6)，689-697
[43]Jiang, YY; Gao, Y; An, Q*. Dynamic analysis of the rotor supported by journal bearing with micro-spherical surface texturing. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2014，V228(4)，355-365
[44]Gao, Y; Li, ZM; Ma, FB; An, Q*. Influences of bearing housing nonconcentricity on vibration characteristics of rolling element bearing-rotor system. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2014，V228(4)，388-399
[45]Man, JY; Zhou, Q; Tao, ZJ; Zhang, Y; An, Q*. Micro-scale numerical simulation on metal contact seal. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE，2014，V228(12)，2168-2177
[46]Tao, ZJ; An, Q*. Interference analysis and workspace optimization of 3-RRR spherical parallel mechanism. MECHANISM AND MACHINE THEORY，2013，V69，62-72
[47]Gao, Y; Li, ZM; Wang, JW; Li, XL; An, Q *.Influences of bearing housing deflection on vibration performance of cylinder roller bearing-rotor system. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS，2013，V227(2)，106-114